test base recipe

We are legit steroids supplier, our shopping website is: http://www.testosteronepowders.org

Contact Me: joanna@steroidpowders.com

pc4021679-healthy_trenbolone_hexahydrobenzyl_carbonate_parabolan_23454_33_3_副本

IGF-1 Lr3 Bulk Special!!!!

test base recipe

I just made this recipe for test suspension in oil can some one help me out.. I let it sit for 2 hours and now its crystralizing in vial here is my recipe that i used.

can someone help me out on how to get rid of it crystalizing.Or someone have a different recipe.
Bro test base can’t be made like that that I know of, but you could try to re heat it make sure to put a pin in it to relive the pressure
Painless Test Base Conversion

1) 10grams of Test no ester
2) 10ml BA
3) 10ml BB
4) 70ml peg

Measure the powder out to 10.0 grams pour in a beaker or vial, which ever you choose. Mix BA,BB and peg with the powder. Then you heat the solution until all the powder is dissolved. Then you filter it in a sterile vial and let cool. I have filtered when hot and cool and it flows easier while it is warm than cool. After it cools down you are ready to inj. a painless Test suspension.

makes 100ml @ 100mg/ml
I am the irishman your mother warned you about…..

I dont have a girlfreind but i know a girl who would get really mad at me if she heard me say that…

We are legit steroids supplier, our shopping website is: http://www.testosteronepowders.org

Contact Me: joanna@steroidpowders.com

Disclaimer – My comments in no way promote the use of androgenic/anabolic steroids and/or any prescription drug without a physician’s prescription. All my comments, questions and referrals are striclty for entertainment purposes only!

I am the irishman your mother warned you about…..

I dont have a girlfreind but i know a girl who would get really mad at me if she heard me say that…

Disclaimer – My comments in no way promote the use of androgenic/anabolic steroids and/or any prescription drug without a physician’s prescription. All my comments, questions and referrals are striclty for entertainment purposes only!

Default
Thanks for the info but what peg should i use?
Painless Test Base Conversion

1) 10grams of Test no ester
2) 10ml BA
3) 10ml BB
4) 70ml peg

201291112515285_副本_副本

We are legit steroids supplier, our shopping website is: http://www.testosteronepowders.org

Contact Me: joanna@steroidpowders.com

Measure the powder out to 10.0 grams pour in a beaker or vial, which ever you choose. Mix BA,BB and peg with the powder. Then you heat the solution until all the powder is dissolved. Then you filter it in a sterile vial and let cool. I have filtered when hot and cool and it flows easier while it is warm than cool. After it cools down you are ready to inj. a painless Test suspension.

makes 100ml @ 100mg/ml
have you tried this with that much peg and BA it seem like it would be a killer is so and it is pain less would it work for win you think

Reply With Quote Reply With Quote
06-02-2008, 10:04 AM #8
mmafighter mmafighter is offline
MuscleChemistry Newbie
Has anyone actually tried this method, ive been searching and this is the recipe that keeps popping up on the boards but no one seems to have actually tried it.

I cant imagine 10% BA with peg being painless???

10% is painfull when injecting believe me, specially when you must inject everyday it will turn out to be a very short cycle.
i have made it oil base and water based both where nice and good to inject.
Last edited by le-chef; 01-09-2009 at 01:21 PM.

Reply With Quote Reply With Quote
01-23-2014, 09:14 AM #10
Presser Presser is online now
Janitor
just found this and know we had someone asking recently bump

We are legit steroids supplier, our shopping website is: http://www.testosteronepowders.org

Contact Me: joanna@steroidpowders.com

I would love some input on this as well as I have tried about 6 different recipes on this with in the last 2 months and well I can tell you in oil it usually crashes, but water base is the way to go and it seem every time I use water recipes there is always about 100-200 mg of test left in the bottle and cant be pulled into the syringe. I am surprised that no one wants to share how to make batches of test suspension like it is a big secret. I mean I can agree to a certain point to keep it on the hush to a point. PM me if you have a true and tried Test suspension recipe.

Quote Originally Posted by Doctormotiv8or View Post
I would love some input on this as well as I have tried about 6 different recipes on this with in the last 2 months and well I can tell you in oil it usually crashes, but water base is the way to go and it seem every time I use water recipes there is always about 100-200 mg of test left in the bottle and cant be pulled into the syringe. I am surprised that no one wants to share how to make batches of test suspension like it is a big secret. I mean I can agree to a certain point to keep it on the hush to a point. PM me if you have a true and tried Test suspension recipe.
did you ever find one bro, we have loads of them inhere

Default
I’m pretty sure I have tried them all. I think most recipes on here are just repost of others that people haven’t actually tried. It’s a shame lol. As for everything else I’m solid but water base ( thumbs down)
People who think they know everything are a great annoyance to those of us who do.
Why does one need peg? I don’t feel like ordering more shit.
Quote Originally Posted by irishpride View Post

We are legit steroids supplier, our shopping website is: http://www.testosteronepowders.org

Contact Me: joanna@steroidpowders.com

nless Test Base Conversion

1) 10grams of Test no ester
2) 10ml BA
3) 10ml BB
4) 70ml peg

Measure the powder out to 10.0 grams pour in a beaker or vial, which ever you choose. Mix BA,BB and peg with the powder. Then you heat the solution until all the powder is dissolved. Then you filter it in a sterile vial and let cool. I have filtered when hot and cool and it flows easier while it is warm than cool. After it cools down you are ready to inj. a painless Test suspension.

makes 100ml @ 100mg/ml
My dog tried this and it is a botched recipe. Also tried doing

10 grams powder
18 Ml BB
3 ml Ba
69 peg 300

Botched recipe.

Neither work.
People who think they know everything are a great annoyance to those of us who do.

Reply With Quote Reply With Quote

Ok so what’s the correct way
Last edited by Doctormotiv8or; 10-23-2014 at 08:53 PM.
Im working on one, I will let you know if I get it to work right. Im on my 3rd try. Like I stated in the other TNE posts I dislike suspensions they are a pain in the ass to work with.

Test suspension 20ml@ 100mg/ml.

I believe this is the way I use to make it abd it held in a nice white suspension without any separation and flowed nicely. I’m taking numbers off the top of my head right now so it may need minor tweaks

15 ml bac water in a sterile vial.
In a non sterile vial:
3.6ml bb
.25 polysorbate 80 (surfactant)
.35ml to .5 ml guaiacol.
2 g test base.

If too high on the ps80 it will look like gunk and fall to the bottom. I will heat the vial with my solvents and raw until liquid. I turn the temp down keep the liquid warm but not so hot that it burns the filter. I use a .45 on this. Also I use a 3rd vial. This 3rd vial is simply to set your syringe filter and 18g pin in while shaking the sterile vial to help prevent any liquid in it from crashing and making the filter useless.

I filter to I S his typically at 1 or 2 ml at a time. I will push the 1 – 2ml thru my filter into the water in my sterile vial, I detach the filter and set that on my 30ml vial that’s warming on the burner which keeps the filter housing warm enough to prevent a liquid in it from crashing. I immediately put a stopper on my sterile vial that I just filtered my 2ml into and shake vigorously for about 20 to 30 seconds. I also let the liquid vial go back on the hear periodically. And I continue in this fashion until it’s finished. It’s important to filter 1-2 ml only at a time and shake immediately after for a good 20 seconds. If u try 1 ml the first time u attempt to filter nothing will come out so I use 2ml the first time and try to use 1 ml the rest of the time. If u keep the filter warm you should be able to do 2 x 20 ml vials per filter.

It’s not the fastest method and again I pulled those numbers off the top of my head. I think the bac water was supposed to be something like 13.75ml , 3.6 ml bb, .6ml ps80, and .5ml guaiacol. But it seems to me like the .6 ps80 was slightly too much. I think either will work but now that I think about it I’m pretty sure the bottom numbers are more likely right but it’s to late for me to add it all up. Do the numbers work out 100% perfect probably not but close enough for a small amount. I will have more. Guaiacol tomorrow I believe and I’ll see if I can get one Madd up and post a pic. I know it’s painless and smooth.

We are legit steroids supplier, our shopping website is: http://www.testosteronepowders.org

Contact Me: joanna@steroidpowders.com
Thanks bodock thanked for this post Likes bodock liked this post

I just brewed a small 30ml batch using this recipe, except I used all EO instead of EO/GSO.
It holds great, is nice and thin, and not much pip at all

test base recipe

Most cant use EO. I tried it with GSO and EO and my powder still crystalizes after sitting for a while. Even I cant get a test base suspension to hold, however I did get it to hold with winny but the substances have different properties.

We are legit steroids supplier, our shopping website is: http://www.testosteronepowders.org

Contact Me: joanna@steroidpowders.com

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s